PUBG Proxy: The Same IP for Your Steam Account, at Home or Abroad
Keep your Steam and PUBG logins on one consistent IP, use a home-country IP while you travel, and run stats tools and scripts from a fixed address. Sticky residential sessions or static ISP IPs, over HTTP/HTTPS or SOCKS5.
PUBG is Krafton's battle royale, available on PC through Steam and on console, with ranked and casual modes and servers in regions including NA, EU, Asia and SEA. A PUBG proxy is an intermediate server that your PC, router or app connects through, so Steam and Krafton's login and web services see the proxy's IP address and location instead of yours.
A proxy cannot fix desync. Every proxy adds a hop, so it usually adds a little latency, and it can only help when your ISP's own route is poor. It also does not carry your matches: live match traffic in most online games, PUBG included, is UDP, and Fusion Proxy's servers carry TCP connections only.
Where a proxy helps in PUBG is around the match: one consistent IP for Steam logins and account management, a home-country IP while you travel, Krafton's web pages seen from a country you choose, and a fixed IP for stats tools and scripts. Fusion Proxy provides residential IPs in 120+ countries with city targeting where the dashboard lists the city, sticky sessions of up to 120 minutes, static ISP IPs in 30-day periods, and HTTP/HTTPS and SOCKS5.
Setup
How PUBG Proxies Work
Set it up once in a SOCKS5-capable app, your launcher or your router. Logins, launchers and web pages go through the proxy; live match traffic does not.
Create your accountSign up in a few seconds and access the dashboard where you can manage all of your proxy products.Step 1
Choose a proxy typePick residential for account logins, ISP for one fixed IP per account, or datacenter for tools and scripts.Step 2
Select location & settingsChoose the country your PUBG account should log in from (residential also offers cities) and a sticky session to keep one IP.Step 3
ConnectEnter the proxy in a SOCKS5-capable app, your launcher or your router. Logins and web traffic use it; live match traffic (UDP) goes directly.Step 4
Proxy types
Best Proxy Types for PUBG
Choose the proxy type by what you use it for: account logins, one fixed IP per account, or tools and scripts.
Most Popular
From $0.65/GB
Residential Proxies
Real household IPs in 120+ countries, with city targeting where the dashboard lists the city, HTTP/HTTPS and SOCKS5, and rotating or sticky sessions. Pick sticky for PUBG: it holds one IP for up to 120 minutes. Billed per GB, and the traffic does not expire.
Static dedicated IPs registered to telecom networks, with traffic included under a fair-use allowance, HTTP/HTTPS and SOCKS5, in 30-day periods you can renew. Good for a Steam account that should keep one IP for months. Ordered by country; a specific city only when it is in stock.
Plain facts instead of gaming myths: a proxy gives your account a stable IP from the country you choose. It does not lower ping, and our proxies do not carry UDP match traffic.
Rotating residential IPs, plus static ISP & datacenter proxies
We cannot promise either way, and rules can change, so read Krafton's current Terms of Service, and Steam's if you play there. Cheats, bots and account trading break those terms whether or not you use a proxy, and a proxy is not a way around a ban.
Will proxies reduce desync?
No. Desync happens inside the match, and live match traffic in PUBG, as in most online games, is UDP, which our proxies do not relay, so your matches do not go through the proxy. A proxy also adds a hop to the traffic it does carry, so it usually adds a little latency rather than removing it.
Can I play on Korean servers?
Not because of a proxy. Which server you play on is set in the game, not by your IP, and live match traffic is UDP, which our proxies do not relay. A Korean proxy changes only the IP that logins and web pages see, and it does not change your Steam store country.
Which proxy for ranked?
Ranked matches do not go through our proxies, so no proxy type changes them. For a consistent IP on your Steam account, use a sticky residential session (one IP for up to 120 minutes) or a static ISP IP that stays yours for each 30-day period. Keep datacenter proxies for tools and scripts, not for playing on your account.
Console support?
Partly. On console, set the proxy on a router that supports it: use a sticky residential session or a static ISP IP, enter host, port and credentials, and check the IP with our My IP tool (/tools/my-ip) or the Proxy Checker (/tools/proxy-checker). Sign-in, store and web traffic over TCP can use it; live match traffic is UDP, which our proxies do not relay.
Find connection settings, plan comparisons and checks you can run with your own pages before a larger order. Open the guide to choose a topic or follow the setup steps.
Read moreRead lessin this guide
Before and after: a saved proxy setup
These examples show which settings and checks to keep when you want to use the same setup again.
What to save
Before
After
Application
Only the browser was checked.
Test the specific account website or supported launcher.
Connection
The proxy type was guessed.
Use the protocol supported by the TCP client.
Game traffic
Web and live-match traffic were treated together.
Keep TCP proxy checks separate from UDP gameplay.
How do you check that your proxy is connected?
Copy the proxy host, port, username and password from your Fusion Proxy dashboard into the application you want to connect. Select the protocol that matches the generated endpoint. Some applications have four separate fields; others expect a single address in the form host:port:username:password. Use the format that your application's proxy settings request. A misplaced field or an extra space in the password can prevent a connection even when the account is active.
Open an IP-check page through that application and compare the displayed address with your normal connection. Next, open the website you actually plan to use. Check that the expected page loads and that any country or language settings are correct. Save this working configuration before adding other profiles or starting a larger batch. If the IP checker works but the website fails, keep the website's response code and the time of the request for troubleshooting. If both fail, check the protocol, credentials and available plan balance first. A test in your browser checks that browser; run a separate check for a script or desktop application with its own proxy settings.
Check the public IP in the same browser or application that will use the proxy.
What information helps support fix a connection problem?
Send support the application name and version, proxy type, protocol, selected location and the approximate time of the problem with timezone. Include the exact error message and say whether it happens on every request or only on one website. Remove the password from connection URLs, screenshots and logs. If a simple IP-check request fails too, mention that result; it helps distinguish a connection problem from a page-specific issue.
Describe what changed before the failure. Common examples include a client update, a new proxy password, a different city selection or a change to the destination page. Keep one small example that reproduces the error and one recent working example if available. Avoid sending a whole customer dataset when a single redacted request is enough. For ongoing team use, keep the tested settings, subscription renewal date and responsible person in the place where you maintain the application. Add the test page and the result you expect. A colleague can then check the connection after an update or take over a scheduled job without copying unknown settings from an old browser window.
Include one failing request, the time and the client version, with the password removed.
How do you select a country, state or city?
Standard residential proxies support country, state and city targeting through the endpoint generator. Start by selecting the country. Add a state or city when you are checking something local, such as a delivery area or a city-specific search page. A national catalogue check can often use country targeting. Keep the selected location with the generated endpoint so a colleague can tell which market that connection is intended to check.
After connecting, check the exit IP's reported location and open the target website. Look at the website's own location settings too. A saved delivery postcode, account address or language preference may take priority over the IP. For a local delivery test, set the postcode deliberately and keep it the same on repeat visits. If the result looks wrong, try a clean browser profile and compare the requested location with the site's displayed country. IP lookup databases can disagree, so include the lookup service and the actual page result when contacting support. Static ISP and datacenter location choices depend on current stock; their order form shows which country and city allocations are available.
Select the country first, then add a state or city when the page you are checking needs it.
What should you check when a proxy request fails?
Check the error returned by your client before starting another request. A proxy authentication error usually points to the credentials or the way they were entered. A timeout can involve the proxy connection, the destination or your own network. If a website loads but the expected price or heading is missing, inspect the page content and the selector used by your script. Keeping these errors separate makes the next step much clearer.
For a temporary connection failure, use a small retry limit and a delay between attempts. Save the failed URL so it can be retried later without running the whole list again. If the destination returns a rate limit, follow its retry instructions and reduce the request rate. Stop and review access when the site rejects the requested operation. Be especially careful with forms, orders and account changes: a timeout after submission can occur even though the change succeeded. Check the account before submitting the same action again. When contacting support, include the time, client, protocol and response message, with the password removed. A single request that reproduces the problem is more useful than a log full of repeated failures.
Read the response first: a timeout, incorrect password and blocked page each need a different fix.
Where should you store your proxy username and password?
Save your proxy username and password in the application's protected settings, an environment configuration or your team's password manager. Keep them out of public repositories and shared reports. If a tool stores a full proxy URL, remember that the URL may contain the password. Check screenshots and copied error messages before sharing them, especially when they show the endpoint generator or a browser's proxy settings.
To help someone reproduce a connection problem, send the client name and version, selected protocol, proxy host and port, approximate time with timezone, and the error message. Replace the password with a clear placeholder. A simple IP-check request is often enough to show an authentication or connection error without sharing customer data. If credentials were exposed, change them through the supported account controls and update every application that uses them. Test one connection before restarting a queue of jobs. For a shared setup, record who maintains it and where the current credentials are stored. That lets another teammate make a planned change without searching through chat messages or copying an outdated password from an old script.
Keep working credentials private and remove the password from screenshots and support examples.
How much proxy traffic will your project use?
The amount of traffic depends on what your application downloads. A browser may load the page, images, fonts, scripts and background requests. A script that only retrieves the HTML can use much less. To estimate your standard residential plan, run a small batch with the same client and settings you intend to use later, then check the change in traffic usage in your dashboard.
As a calculation example, if 100 completed page checks use 20 MB, 10,000 similar checks would use about 2,000 MB, or 2 GB. This is an example of the arithmetic; measure your own pages because a photo-heavy page and a short text page can differ considerably. Include repeat visits and retries in the estimate. If you only need text, check whether your browser tool can skip unnecessary images or video, then confirm that the required text still loads. Keep images enabled for visual checks such as banner or layout reviews. Review traffic again after a website redesign or a change in your script, since either can alter how much gets downloaded on every visit.
Test a small batch, check its traffic use in the dashboard, then scale the estimate to your planned run.
Is a datacenter proxy suitable for your website or script?
Datacenter proxies are a useful starting point for scripts, website checks and permitted collection jobs that work with server-hosted IPs. Fusion Proxy's datacenter product provides static allocations. Check current country stock and any city choices in the order form, then test the pages your application needs. A site may return different content, ask for verification or reject a datacenter connection, so include a few typical pages in the first test.
For example, test a category page, a product page and the next page of a paginated list. Confirm that your script can read the fields it needs on each page. Check the response body as well as the status code: a page can return HTTP 200 while showing a login screen or a challenge. If you are comparing datacenter and residential proxies, use the same page list and application settings for each. Note the data used, completed pages and any requests that need attention. Start with a small number of simultaneous requests and follow the destination's access limits. You can increase the batch after the application returns complete results reliably.
Try your actual target pages before choosing the size of a datacenter order.
How long can you keep a residential session?
Fusion Proxy's standard residential product offers sticky sessions from 1 to 120 minutes. In the endpoint generator, choose Sticky, set the duration and copy the generated connection details into your application. Use those details throughout the visit. This suits a series of connected actions, such as signing in to an account you manage, opening several account pages and checking a setting. Keep the browser's cookies and storage in the same profile during the session.
Choose a duration that leaves time for the whole visit, including typing and normal pauses. For example, if your own test normally takes around ten minutes, allow some extra time for a slow page or a verification step. Check the public IP at the beginning and end when troubleshooting an unexpected change. Household connections can become unavailable, so save progress before any step that is difficult to repeat. If a connection is lost during a form submission, check whether the submission succeeded before sending it again. When you need an address to remain assigned across several days, use the static ISP or datacenter options rather than extending a short residential visit.
Set a sticky duration from 1 to 120 minutes and use the same session for each connected step.
How do you keep the same proxy IP between visits?
Use a static ISP or datacenter allocation when a service needs a fixed outbound IP. This can be useful for an IP allowlist, a business account you manage regularly or a scheduled job that should keep the same connection settings. Both products provide static addresses, with different network origins. ISP proxies use ISP-registered addresses, while datacenter proxies use server networks. Check the destination with the product you intend to order.
After ordering, save the assigned address and connection details in the relevant browser profile or application. Record the renewal date where your team tracks subscriptions. If the destination has an IP allowlist, add the assigned address before running the job and test that access works. Keep the same browser profile for returning account visits, because cookies and login state are stored by the browser. A static IP does not preserve those settings when you switch profiles or clear storage. If you replace an address, update every application and allowlist that uses it, then run a short connection check. This is particularly useful when several scheduled jobs share one configuration.
Keep the assigned IP, browser profile and account settings together for returning visits.
Which proxy type should you choose?
Residential proxies provide household IPs with rotating connections or sticky sessions. Fusion Proxy's standard residential product supports country, state and city targeting and is billed by traffic used. Static ISP proxies provide assigned ISP-registered addresses, while datacenter proxies provide assigned server-network addresses. For both static products, check the countries and any city options currently offered in the order form.
Start with the requirement that would be hardest to change. For an IP allowlist, that is usually the fixed address. For a regional website test, it may be the country or city. For a large collection job, traffic usage and the site's response to the chosen IP type matter. Test a small set of actual target pages with the options that meet those requirements. Check the content returned, session behavior and cost for the expected run. Compare current plan duration and stock before ordering. If you need steady high-volume residential traffic with country targeting, also look at the unlimited speed-tier plans. Keep product differences visible in the comparison so you can see which setup the monthly price would actually provide.
Choose rotating residential access for changing household IPs, or a static allocation when the IP needs to stay assigned.
Need help choosing or connecting?
Check current plans and available locations before ordering. For setup help, use the connection documentation or tell support which application and website you want to connect. Include any error message and the selected protocol, with the password removed.